► Apply for Beamtime.
► APS User Portal
► Register as a General User.
► Register as a Visitor to APS.
► Experiment Safety Approval Form (ESAF).
► End of Experiment Form (EEF).
► APS Storage Ring Schedule.
► GSECARS Beamtime Schedule.
► Argonne Guest House (AGH).
► Safety Training - Remote Access.
► APS Publication Database.
► High Pressure Tools
13 BMD Tomography (CMT)
Microtomography : Typically monochromatic beam 10-65 keV, sometimes white beam to 100 keV. Maximum beam size is 50mm (1mrad).
Contact : Mark Rivers email@example.com.
Beamline Scientist Yanbin Wang, 13 BMD LVP
13 BMD Diamond Anvil Cell (DAC)
Diamond anvil cell diffraction and imaging : Typically run at 37 keV, but sometimes up to 70 keV. Maximum horizontal beam size of 5mm (0.1 mrad).
Contact: Vitali Prakapenka, firstname.lastname@example.org
The 250T large volume press (LVP) houses our DIA, D-DIA, HPXMT, and T-10 pressure modules. By combining X-ray diffraction and imaging techniques with these high-pressure modules, our facility provides a unique “Swiss-army-knife” approach to solving scientific problems with optimal flexibility.
The bending magnet fan is divided into two parts. An outboard fan of 2.5 mrad feeds the 13-BM-D station, and an inboard fan of 1.5 mrad feeds the 13-BM-C station. These fans are separated by 1 mrad. The extreme inside and outside 0.5 mrad on each edge of the 6 mrad fan is not used.
The 13-BM-D beamline has a non-focusing Si <111> double crystal monochromator that covers the energy range from ~5 to 70 keV. There is a 1 m long vertical focusing mirror in the 13-BM-B optics station. This mirror is used for some experiments and removed for others. There are small K/B mirrors that are placed on the experimental table in 13 BM-D.